您的位置: 标准下载 » 国内标准 » 行业标准 »

JTJ 261-1997 港口工程预应力混凝土大直径管桩设计与施工规程(附条文说明)

时间:2024-05-15 19:21:45 来源: 标准资料网 作者:标准资料网 阅读:9585
下载地址: 点击此处下载
基本信息
标准名称:港口工程预应力混凝土大直径管桩设计与施工规程(附条文说明)
英文名称:Port engineening technical code of design and constraction for large diameter post tensioned prestress concrete cylinder pile
中标分类: 工程建设 >> 交通运输工程 >> 港口与航道工程
发布部门:中华人民共和国交通部
发布日期:1997-07-31
实施日期:1997-10-01
首发日期:
作废日期:
起草单位:交通部第三航务工程局科学研究所
起草人:严忠英、朱仰圣、刘鹏飞、张才博、李元胤、 罗晓明、曹称宇
出版社:人民交通出版社
出版日期:1997-10-01
页数:65页
适用范围

本规程适用于港口工程中应用的直径为1. 0m~1.4m 预应力混凝土管桩;修造船工程和其他类似工程可参照采用。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 工程建设 交通运输工程 港口与航道工程
【英文标准名称】:Aerospaceseries-24°interfaceforadaptors,threaded,withlockring-Geometricconfiguration
【原文标准名称】:航空航天系列.24°带锁环的螺纹适配器接口.几何构型
【标准号】:BSEN2605-2005
【标准状态】:现行
【国别】:英国
【发布日期】:
【实施或试行日期】:
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:航空航天运输;航空运输;代码;连接端部;设计工作单;名称与符号;尺寸;弹性体;精整;流体技术;液压系统;作标记;材料;O型密封圈;特性;质量保证;旋入式;螺纹件;航天运输;规范(验收);弹簧固定环;螺纹;公差(测量)
【英文主题词】:Aerospacetransport;Airtransport;Codes;Connectionends;Designworksheets;Designations;Dimensions;Elastomers;Finishes;Fluidtechnologies;Hydraulicsystems;Marking;Materials;O-rings;Properties;Qualityassurance;Screwing-in;Screwings;Spacetransport;Specification(approval);Springretainingrings;Threads;Tolerances(measurement)
【摘要】:Thisstandardspecifiesthedimensionalcharacteristicsofthe24°interfaceforadaptors,threaded,withlockring,assemblywithelastomerO-ring,foraerospaceapplications.Thisstandardappliestoalladaptors,threaded,withlockring,assembledwithEN2607toEN2608andusedinhydraulicsystemswithanominalpressureupto28000kPaforwhichametric-sizecouplingwitha24°conicalsealingsurfacehasbeenselected.
【中国标准分类号】:V20
【国际标准分类号】:49_030_99
【页数】:10P.;A4
【正文语种】:英语


Product Code:SAE J575
Title:Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width
Issuing Committee:Test Methods And Equipment Stds Committee
Scope: This SAE Recommended Practice provides standardized laboratory tests, test methods, and requirements applicable to many of the lighting devices and components covered by SAE Recommended Practices and Standards and is intended for reference for devices used on vehicles less than 2032 mm in width, regardless of length, or 7620 mm in length regardless of width. Tests for vehicles larger than 2032 mm in overall width are covered in J2139.